Nostalgia Electrics CCP200 Manuel d'utilisateur télécharger pdf (Page 12)

ENGLISH

HOW TO OPERATE

Before ﬁrst use, clean the inside of the unit by wiping with a moist,

non-abrasive sponge, towel or cloth and then wipe with a non-

abrasive dry towel. Wipe down the inside of the Kettle and be

sure it is properly placed in the brackets before starting.

First, ﬁnd a ﬂat surface near an electrical outlet before 1.

starting. Make sure your cord is away from any water source.

It is acceptable to use an extension cord if needed.

Gather your popcorn making supplies: popcorn, seasonings, bowls 2.

or bags for holding the popcorn, cooking oil, Kernel Measuring

Cup (B) and Oil Measuring Spoon (D). (Kernel Measuring Cup

and Oil Measuring Spoon are included with your unit).

Plug in the appliance while switch is ﬂipped to OFF position.3.

Make sure Kettle is properly secured in support brackets. 4.

Make sure Kettle motor is plugged in.5.

Turn appliance ON by ﬂipping the switch on the top of the 6.

machine (see illustration above for location of switches). Allow

the appliance to run 3-5 minutes to heat up Kettle.

Turn unit OFF.7.

Use the Oil Measuring Spoon supplied with your OLD FASHIONED MOVIE TIME 8.

POPCORN CART to add 1 tablespoon of your favorite popcorn cooking oil to

the Kettle. For best popping results, it is suggested to use light vegetable oil.

Add popcorn kernels to the Kettle using supplied Kernel Measuring Cup (B).9.

Turn the unit ON and close the door. In no time at all, you will 10.

hear the popping begin. Fresh, hot popcorn will begin to burst

out of the ﬂip lids on the Kettle - just like at the theater!

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Pas de commentaire

Nostalgia Electrics CCP200 Manuel d'utilisateur Page 12